Om Industries 1 Om Industries 2 Om Industries 3 Om Industries 4
Product Superiority
Coating & Color Range
Our Infrastructure
Office : 314, 3rd Floor, Rise On Plaza, Sarthana Jakatnaka,
Varachha Road, Surat-6, Gujarat. India
Factory Unit-1: Road No-6, Udhna Udhyog Nagar,
Udhna, Dist - Surat.
Gujarat. India
Factory Unit-2: Kadodara road, Kadodara,
Ta. Bardoli, Dist - Surat.
Gujarat. India
Phone : +91 8980300088,
+91 8866118223

Doís and Doníts

  • Structurals like tubes, HSS, angles and channels (except zinc coated supporting structures) should be painted before fixing the sheets.

  • Use recommended personal protective equipment (helmet, goggles, shoes, hand gloves & high visibility vests) while handling and installing the sheets.

  • Fixing of SDS screws recommended with Torque adjustable guns. For roof work, fix screws on the crest. For wall cladding, fix on the crest or on the valley. Fasteners to confirm to AS 3566 Class 3- 4 for external application.

  • Always wear smooth, soft-soled shoes.

  • Cut materials on the ground and not on other materials where hot particles can fall and cause damage to the finish of the sheet.

  • Remove all metal scrap, drill particles, pop rivet mandrels and excess fasteners from the roof to avoid rust stains.

  • Use a power saw with a metal-cutting blade to cut thin metals. This results in fewer hot metal particles and leaves less resultant burr than a carborundum disc.

  • Clean the roof with clean water or mild detergent by using soft cloth, mop or soft nylon bristle brush to avoid swarf stains and rusts.

  • Never use abrasive or solvent type cleaners and wire brushes, steel wool, sponge scourers to clean the roof sheets as it softens the paint film.

  • Don’t over drive or under drive the screw as it can lead to water leakage or washer damage.

  • Don’t leave material articles on the roof.

  • Don’t use acetic acid based sealants which liberate aggressive by-products during curing which is detrimental to steel sheets.

  • Don’t walk on single rib, sheet, and end laps gutter and skylight sheets.

  • Don’t throw bird feed on the sheet. Bird-dropping can damage the color & aesthetics of the sheets.

  • Don’t use stainless steel screw, J hook and carbon washer as they may damage the sheet.

  • Don’t keep color coated sheets in contact with cement, dirt and chemicals like paint thinner.

  • Don’t install the roof sheeting during rains, as sheets will get wet and slippery.

Icon Roofing Sheet Icon Shade Icon Fibre Sheet Icon Color Coated Coil
Icon Galvanized Sheet Icon Color Coated Sheet Icon Air Turbo Ventilator Icon MS Pipe
Icon PPGL Sheet Icon Self - Drilling - Screw Icon Steel Icon PPGL Coil
Icon PPGI Sheet Icon Structure Icon APVC Sheet Icon PPGI Coil